The Freelap BMX Gate Timing Transmitter is used to start all the Freelap watches in a BMX starting gate. Using the supplied connector, the BMX gate is connected to a Cartessa or Pro-Gate system. The supplied copper wire is looped underneath the starting area. When the signal is sent from the Cartessa/Pro-Gate to drop the gate, a magnetic pulse simultaneously starts all the watches. Power for the BMX Gate is supplied by the Cartessa/Pro-Gate; no batteries or additional power is required.
A Tx Full Track or Tx Full Track 2 can be used to trigger each watch as it crosses the finish line. Additional Tx Full Track transmitters can be used to acquire additional splits.
The Figure below shows the front of the BMX Gate.
The Figure below shows the back of the BMX Gate. The supplied copper wire is attached to the red and black connectors for easy setup and removal.
